Ambir ImageScan Pro Scanner

I own FileCenter DMS which may utilize the TWAIN drivers and make this a complete kit. If not, you can buy a license of AmbirScan Pro for $99.95 from the manufacturer. Hope this works, I have been eyeing high speed scanners for a couple of years. I only need to scan documents occasionally, but I have used a Fujitsu extensively and it’s a dream to turn paper into files. Fingers crossed on this purchase!

3 Likes

Thanks. I didn’t get this. I did consider it, but it would be like throwing money away for me. Have an HP all in one that we use for scanning only (have a separate canon laserjet for printing). We are almost paperless in my house. I don’t even have enough paper to shred & I need to donate my shredder that’s no longer used. Any incoming mail gets the ink roller stamp before recycling.

Back to this item. If it doesn’t come with any software, searching Google will get some results that should work. I’ll even help search if someone needs it (just ask or dm me) I feel bad about posting that software link. I can’t imagine that it won’t even come with instructions or a way to operate it.

2 Likes

I almost bit, but like you, I have an older inkjet printer for scanning and I print on a fast laser printer.

1 Like

Thanks for the details. I went ahead and ordered one at this low price. Perhaps no license key is part of the reason for the low price. But, as long as I can get it working with the TWAIN driver with at least some function/settings control I’ll be okay with that.

3 Likes

Posting the software link was helpful, at least to me. It opened my eyes to the fact that no scanning application was included before I made this purchase. I hope that my FileCenter DMS can use the TWAIN driver that IS included/downloadable for free, as that would be a perfect solution for me. Otherwise, even adding $99 for the software to the $75 price of this is a LOT less than a Fujitsu or Canon duplex scanner would cost new.
I also have all-in-one printers in my home but the major benefit of something like what was sold here is DUPLEX scanning - capturing both sides of a page in a single pass. I have yet to see a home- or small office-model of an all in one that does that. One of mine can feed the document in, reverse feed it and then scan it again on the other side, but that is clunky and problematic on my device. I do tech support for individuals and small businesses, and (like mine) the absolute first thing that fails on an all in one is the feeder for the originals. The way they are laid out with the paper being horizontal means that the slightest buildup of dust in the opening (which is always open) makes the feeder grab multiple pages or twist the page as it feeds or fail to pick it up at all. If I need to lift a cover to scan a multi-page document, it’s a pain (to me). Most of the scanning I do is multi-page.
I think all of the comments on this device were helpful, thank you all.

4 Likes

Yeah, I misspoke since this looks just like a laser fax/scanner/printer I used to have. My point was the cost for the whole device was less than a laser printer cartridge

3 Likes

Received my scanner today. Looks pretty new, a few scuff marks on the clear plastic catcher tray, but it’s in really nice shape. It comes with a replacement pad module, just like a new one would. Both the one that is installed and the replacement look and feel brand new. Comes with an A-B USB cable and a sheet showing how to attach the catcher tray.
Then the fun began. I installed the DS820ix driver as downloaded from ambir.com. It installed just fine (it uses an ancient Windows installer utility that I have not seen since around 2010 or so). It installs the scanner driver and the ADF driver, which is crucial to the operation of the device.
The device never showed up in my Device Manager (Windows 10) or under Settings. Strangely, an Unknown Device showed up in Device Manager but it was named DS830ix. My scanning software (FileCenter DMS) did not recognize the scanner. It saw the 820ix driver but not the device.
And the number on the display on the scanner stayed at 0 (zero). When the scanner is ready, this is supposed to change to 1.
I followed my hunch and figured it might just be a DS830ix, even though the label on the cover and the serial number label on the bottom both say 820ix. I used Revo Uninstaller to rip out the 820ix driver and installed the 830ix driver instead and POOF! I have a fully functioning scanner that identifies as an 830ix. It works superbly with FileCenter including duplex control, color/black/grayscale setting, DPI, everything.
I am super happy with this purchase. I have a lot of scanning to do!
EDIT: Just scanned a 37 page 1-sided document in one pass at 300dpi in under 1 minute.

7 Likes

That great to hear @Jonas4321 So it didn’t come with any kind of software?
That bites. But your instructions will help anyone who bought this get it installed & working. Your review of the product make me wish I bought it even though I don’t need it. Who knows if it comes up again I can consider getting rid of the HP. This one sounds so much easier to use. Thank you for following up. Much appreciated.

1 Like

Because I didn’t care what software was installed with the TWAIN driver, I never bothered checking.
It turns out that the ADF software that is installed with the TWAIN driver puts a utility in your System Tray called Ambir ImageScan Pro 830ix (in my case). This provides customization of the Scan button on the scanner and the different scan modes (as indicated by the number showing on the scanner display, selectable from the + and - buttons).
The default is “1”, and in this mode it scans to a PDF (without OCR) at 200dpi grayscale duplex using the Automatic Document Feeder (ADF). These can be changed, of course, but these are the default settings.
When you load a document into the scanner and it is displaying “1”, when you press the Scan button it feeds it through and scans the document.
It took me a bit to figure out where the heck the scanned document was being saved (automatically), but I found that if you click the Save Setup button, you can configure that. Illogical button labeling, imo, as I expected that button to Save the Setup, not Setup the Save. Anyway, the default location for saved documents is C:\Users\Public\Documents\ScanDoc. You can change this.
There are two options on Save Setup - Save and Open, or just Save. Save and Open will automatically open the document in your default PDF reader application.
So, this scanner COMES with software to do scanning when you install the TWAIN driver. It never asked me for a software license key, so I believe that this functionality is free.
I played around with the OCR Utility button option in Ambir ImageScan Pro and it says that the OCR option is available when you install the ABBYY FineReader Sprint OCR software. I have used ABBYY software before (for OCR on screen captures), but am not investigating this as I have software that does OCR.

6 Likes

Thanks for your thorough follow-up! Now I’m hoping it comes back around.

2 Likes

Got mine up and running today, and it worked great! Just installed the TWAIN driver and included ADF utility from the Ambir website, plugged the scanner in, powered it up, and it worked right off the bat! The ADF utility lets you adjust any and all of the settings, and is loaded with 9 presets that cover just about any situation (and you can modify settings within each of those). Ran several scans, including full color double sided, and all worked great. It scans very fast! Very happy with this purchase at the extremely low price! Took the risk and glad that I did

You can order replacement pads and rollers from the Ambir site (though it will take me a long time to reach the 20,000 and 100,000 scan counts for the pads and rollers, respectively. If you do order them, they offer a maintenance pack for $59 that includes everything, plus calibration cards and cleaning fluid…much cheaper than individual items.

If this comes around again at this price…snag one!

4 Likes

The AmbirScan Pro software needs a license key, but the ADF utility that downloads with the TWAIN driver does not need a purchase or license key. (When you download the TWAIN driver per the instructions that come with the scanner, there was a default check next to including the ADF utility…so you want to make sure it is checked and then the download will install them both). So, good news is that you can get the scanner up and running for free.

3 Likes

That is good to hear. Thank you for sharing that information. Hope everyone who purchased this gets good use out of it.

1 Like

@kwd33, did yours work with the 820ix software or the 830ix software?

1 Like

The download link was for the 830ix software.

1 Like

I finally got around to setting mine up on my Mac Mini… Thanks to your shared info (especially from Jonas4321), it appears to work well, but only when I installed it as a 830ix!

FYI: With MacOS, you can use {listed in order of my perceived usefulness}:

  • (1) the Ambir ADF app (with the customizable** presets)
  • (2) the Preview app (choose the ‘Import from Ambir 830ix’) ’option
  • (3) use the MacOS Image Capture Utility

** Customization: you can select scanning options (color, DPI, etc.), output file type, folder location, file-naming, and more.

It does scan multiple pages in duplex (both sides) very fast!

6 Likes

It’s back! I had not been on Woot today until now, sorry for the late post.

UPDATE. WOOT came through. The scanner looks new and came with power cord, usb cord and tray. The included installation instructions worked fine on a windows 10 pro machine. The only issue was that windows protection blocked the launch of the software. Running the software as an Amin solved the issue.

Original comment:

WOW. I Bought one with the implication that these were REFURBISHED. most likely, refurbished here means at most the dust was blown off of these scanners by a third party.

Hopefully, the one I receive actually works and is in reasonable condition.

My scanner arrived today. I installed the Twain and ADF Ambir scan software.

Scanner did scan a single page I feed it and produced a pdf.

However, when I try to launch Ambirscan ADF , nothing happens. The program is not started.

This is on a windows 10 pro I3 laptop.

Anyone, any ideas on the problem I have?

Turns out, windows security was blocking the launch. I just opened as an admin, and all worked fine.

2 Likes